Repairing your faulty Chevrolet Impala brakes should be high on your list of priorities when it comes to servicing your vehicle. After all, your Impala brakes could save your life in the event of a collision, and you never know when an accident is going to happen. Knowing how your Chevrolet Impala brakes is a good step in the right direction.

When it comes to Impala brakes, which are typically disc braking systems, there are hydraulic components and frictional components. Basically, there are two frictional parts to your Chevrolet Impala brakes: the brake pads and the brake rotors.

The list of hydraulic parts in your Impala brakes is a bit longer: this includes brake calipers, brake lines, brake hose, a fluid reservoir, and a master cylinder. When you engage your brakes, the pressure is transmitted and amplified through the hydraulic brake fluid and sent to the master cylinder. From there, it travels to the brake calipers, and this is where the frictional element of your Impala brakes comes in. The calipers squeeze together to clamp your brake pads against your brake rotors, and the friction that is generated between them allows your brakes to stop your car. Of course, there are several different problems that can occur with your Impala brakes. A leak in the hydraulic fluid will typically result in soft brakes, while a crimped line or frozen calipers can cause a hard brake pedal that is resistant to pressure. Worn lining on your brake pads is often indicated when your Impala brakes begin to squeal or squeak. Expect to replace your brake rotors, calipers, or both, if your brakes are grinding, shuddering, or pulling to one side.When your Impala brakes are not working as they should, browse our online catalogue for the parts you need to repair them.