Car parts and accessories for all import makes.
 Part # Search 
 Request Quote 
 View Cart 
Home > Chevy > Pickup Parts > Headers

Shop For Parts and Accessories - Select Your Vehicle
 
...or click here to select your year, make and model
Check Out Our New & Improved Catalog!
Headers for Chevy Pickup

Good visibility is extremely important to safe driving, making the simple Chevy Pickup headlight among the most important safety features installed on your vehicle. Drivers that simply did not see an obstacle or another vehicle in time to react safely have been the cause of many vehicle accidents. The headlight is designed to illuminate the road ahead with a strong and accurate beam, increasing your field of vision for safer night driving.


The ability to see well into the distance as you drive is quite important, allowing you plenty of warning of hazardous road conditions, pedestrians or animals in the road, and sharp curves, giving you ample time to navigate around safely around them. In poor weather conditions, early warning of road hazards becomes even more important, as more reaction time is often necessary on wet or snowy roads.


The Chevy Pickup headlight requires occasional maintenance to perform at its best, its bulb becoming dimmer with the wear of everyday use, eventually burning out completely. In most newer model vehicles, repairing the headlight is a simple change of the bulb, easily done at home in just a few minutes. Some vehicles are equipped with a sealed beam headlight, which is a self-contained unit that includes the lens, reflector and filament. When this type of headlight fails, the entire unit is replaced, still a simple job, requiring just a screwdriver and ten minutes of your time to have your headlight shining brightly once again. Our online catalog carries a selection of quality headlight replacement parts, all at very affordable prices. Ordering is always safe and easy on our secure site or our toll-free phone line is just as convenient, staffed with expert customer service assistants who will be happy to help you order your Chevy Pickup headlight.

 
 Part Name Chevrolet K30 Pickup Headers - Direct OE Replacement Click Image to Enlarge
Headers
Part #F3131506
 Brand Flowtech
 Fits 1968-1974 Chevrolet K30 Pickup
 Features
  • Type: Direct OE Replacement
 Year 1968-1974
 Description FLOWTECH II FULL-LENGTH HEADERS, SILVER LUSTER CERAMIC-COATED -- 1.625 in. Primary Tube, 2.5 in. Collector Size, These Headers Are Precision-Engineered And Leak-Tested To Provide The Maximum Performance And Fuel Efficiency Of Your Engine, Formed From Specially Selected 0.060 Cold Roll Flash Controlled Tubing With NASA-Developed Silver Luster Ceramic Coating For Rust And Corrosion Resistance, They Feature Flowtech's Exclusive, Thick, And Mandrel-Formed Power Plenum Collector, All Ports Are Precisely Fitted And Finished With Sturdy And Leaf-Proof O-Ringed Port Seals, They Come With All Mounting Hardware Including Bolts, Nuts, And Premium Gaskets, Must Modify Stock Exhaust To Retain Catalytic Converter, Applications With Oxygen Sensor Use Reducer Part Number 10105 For 2.5 in. 3-Bolt Flange Or Part Number 10110 For 3 in. 3-Bolt Flange, It Is Necessary To Remove The Rubber Stopper Below The Starter On 83-84 4WD, Will Not Fit Angle Plug Heads, Legal Only For Off-Highway Or Racing Use And Pre-Emission-Controlled Motor Vehicles Or Engines, With Flowtech's 90-Day Warranty
Fits: 4WD, 1 Ton, Automatic Transmission, Manual Transmission.
 Your Price $292.01
 Quantity
Chevrolet K30 Pickup Headers also fits these models:
  • 1968::Base; 8Cyl 5.4L GAS, CARB, VIN "E";
  • 1968::Base; 8Cyl 5.4L GAS, VIN "E";
  • 1968|1969|1970|1971|1972|1973::Base; 8Cyl 5.0L GAS, CARB, VIN "E";
  • 1968|1969|1970|1971|1972|1973::Base; 8Cyl 5.0L GAS, VIN "E";
  • 1969|1970|1971|1972|1973|1974::Base; 8Cyl 5.7L GAS, CARB, VIN "E";
  • 1969|1970|1971|1972|1973|1974::Base; 8Cyl 5.7L GAS, VIN "E";
  • 1974::Base; 8Cyl 5.7L GAS, CARB, VIN "Y";
  • 1974::Base; 8Cyl 5.7L GAS, VIN "Y";

 
 Part Name Chevrolet K20 Pickup Headers - Direct OE Replacement Click Image to Enlarge
Headers
Part #F3131506
 Brand Flowtech
 Fits 1967-1972 Chevrolet K20 Pickup
 Features
  • Type: Direct OE Replacement
 Year 1967-1972
 Description FLOWTECH II FULL-LENGTH HEADERS, SILVER LUSTER CERAMIC-COATED -- 1.625 in. Primary Tube, 2.5 in. Collector Size, These Headers Are Precision-Engineered And Leak-Tested To Provide The Maximum Performance And Fuel Efficiency Of Your Engine, Formed From Specially Selected 0.060 Cold Roll Flash Controlled Tubing With NASA-Developed Silver Luster Ceramic Coating For Rust And Corrosion Resistance, They Feature Flowtech's Exclusive, Thick, And Mandrel-Formed Power Plenum Collector, All Ports Are Precisely Fitted And Finished With Sturdy And Leaf-Proof O-Ringed Port Seals, They Come With All Mounting Hardware Including Bolts, Nuts, And Premium Gaskets, Must Modify Stock Exhaust To Retain Catalytic Converter, Applications With Oxygen Sensor Use Reducer Part Number 10105 For 2.5 in. 3-Bolt Flange Or Part Number 10110 For 3 in. 3-Bolt Flange, It Is Necessary To Remove The Rubber Stopper Below The Starter On 83-84 4WD, Will Not Fit Angle Plug Heads, Legal Only For Off-Highway Or Racing Use And Pre-Emission-Controlled Motor Vehicles Or Engines, With Flowtech's 90-Day Warranty
Fits: 4WD, 3/4 Ton.
 Your Price $292.01
 Quantity
Chevrolet K20 Pickup Headers also fits these models:
  • 1967::Base; 8Cyl 4.6L GAS, CARB;
  • 1967::Base; 8Cyl 4.6L GAS;
  • 1967|1968::Base; 8Cyl 5.4L GAS, CARB;
  • 1967|1968::Base; 8Cyl 5.4L GAS;
  • 1968|1969::Base; 8Cyl 5.0L GAS, CARB, VIN "E";
  • 1968|1969::Base; 8Cyl 5.0L GAS, VIN "E";
  • 1969|1970|1971|1972::Base; 8Cyl 5.7L GAS, CARB, VIN "E";
  • 1969|1970|1971|1972::Base; 8Cyl 5.7L GAS, VIN "E";

 
 Part Name Chevrolet K10 Pickup Headers - Direct OE Replacement Click Image to Enlarge
Headers
Part #F3131506
 Brand Flowtech
 Fits 1967-1972 Chevrolet K10 Pickup
 Features
  • Type: Direct OE Replacement
 Year 1967-1972
 Description FLOWTECH II FULL-LENGTH HEADERS, SILVER LUSTER CERAMIC-COATED -- 1.625 in. Primary Tube, 2.5 in. Collector Size, These Headers Are Precision-Engineered And Leak-Tested To Provide The Maximum Performance And Fuel Efficiency Of Your Engine, Formed From Specially Selected 0.060 Cold Roll Flash Controlled Tubing With NASA-Developed Silver Luster Ceramic Coating For Rust And Corrosion Resistance, They Feature Flowtech's Exclusive, Thick, And Mandrel-Formed Power Plenum Collector, All Ports Are Precisely Fitted And Finished With Sturdy And Leaf-Proof O-Ringed Port Seals, They Come With All Mounting Hardware Including Bolts, Nuts, And Premium Gaskets, Must Modify Stock Exhaust To Retain Catalytic Converter, Applications With Oxygen Sensor Use Reducer Part Number 10105 For 2.5 in. 3-Bolt Flange Or Part Number 10110 For 3 in. 3-Bolt Flange, It Is Necessary To Remove The Rubber Stopper Below The Starter On 83-84 4WD, Will Not Fit Angle Plug Heads, Legal Only For Off-Highway Or Racing Use And Pre-Emission-Controlled Motor Vehicles Or Engines, With Flowtech's 90-Day Warranty
Fits: 4WD, 1/2 Ton.
 Your Price $292.01
 Quantity
Chevrolet K10 Pickup Headers also fits these models:
  • 1967::Base; 8Cyl 4.6L GAS, CARB;
  • 1967::Base; 8Cyl 4.6L GAS;
  • 1967|1968::Base; 8Cyl 5.4L GAS, CARB;
  • 1967|1968::Base; 8Cyl 5.4L GAS;
  • 1968|1969::Base; 8Cyl 5.0L GAS, CARB, VIN "E";
  • 1968|1969::Base; 8Cyl 5.0L GAS, VIN "E";
  • 1969|1970|1971|1972::Base; 8Cyl 5.7L GAS, CARB, VIN "E";
  • 1969|1970|1971|1972::Base; 8Cyl 5.7L GAS, VIN "E";


 
Import Auto Parts and Accessories
Order Toll Free
1- 888- 628- 3247
 
 
 
 
 
 
 
 
 
   
   
  Other Makes
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
 
 

[Import Car Parts] [Directory] [Account Login] [Track Order ]
[OEM vs. Aftermarket] [Online Auto Parts Catalog] [Contact Us] [Request Quote] [View Cart]

Hours: Open 24 Hours a Day! Call Toll free!

© 2002 - 2008 The Auto Parts Bin Inc. All rights reserved