Your Ford F350 water pump is an essential part of your vehicle’s cooling system. To keep your engine from overheating, coolant moves through the engine absorbing the heat, and passes through your radiator to release it. Your F350 water pump is responsible for keeping the coolant moving through your engine.

Without a working water pump, your coolant would just sit in your engine and gather more and more heat, until it boiled over and caused your engine to stop. Overheating can cause serious and sometimes permanent damage to your engine, so it is important to ensure that all the components of your cooling system are in good working order.

Typically, there will be one of two different problems with your Ford F350 water pump. The first is that your water pump seal will eventually wear out with age, which causes leaks. If you notice a sudden stream of coolant coming from your engine bay, this is most likely from the weep hope in your F350 water pump, which is alerting you that the seal is worn and you need to replace the pump. Another problem that often occurs with Ford F350 water pumps is worn bearings. You can check the bearings by pulling on the water pump pulley, which should be completely firm in its place and not moving. If there is any give to the water pump pulley, you have worn bearings and should replace them, if not the entire pump. When you need a new F350 water pump, look no further than our online catalogue for an inexpensive, high-quality replacement.Order through our secure online server or toll-free service number to have your new parts shipped right to your door.