Home > Hummer >
H3 Parts > Cold Air Intake
Cold Air Intake for Hummer H3
Did you ever wonder why your Hummer H3 Cold Air Intake system gives you so much more power than the systems of old used to? Well, a good cold air intake gives you this additional power by offering less air restriction than original intakes had. They had many bends and twists that restricted the air flow. This was all done in order to keep the noise level down.
It worked as far as in keeping things quiet, but all of that piping restricted the air flow and hindered the performance of the vehicle as well. Additionally, in many of the older styles of vehicles, the air was drawn from the engine compartment where it was hot.
With the Hummer H3 Cold Air Intake system, the air is drawn from in front of the fender wells or the radiator where the air is colder. Colder air is denser and contains more oxygen, which in turn means that you can also burn more gas. Since the performance of an engine depends a lot on the ratio of gas to air that it gets, it makes sense that the higher the ratio it can handle, the more powerful the vehicle will be. When it comes to increasing the power of your vehicle, we know that using parts of the highest caliber is always best. That is why we offer a guarantee of quality on all of the products that we sell.As an extra incentive, we also offer free shipping on all orders that total over $50! Order your new Hummer H3 Cold Air Intake from us today!
| Hummer H3 Cold Air Intake also fits these models: |
- 2006::5Cyl 3.5L "211 cid, 3460 cc, 3.66 EngBoreIn, 91.4 EngBoreMetric, 4.00 EngStrokeIn, 101.6 EngStrokeMetric" Base
|
| Hummer H3 Cold Air Intake also fits these models: |
- 2006::5Cyl 3.5L "211 cid, 3460 cc, 3.66 EngBoreIn, 91.4 EngBoreMetric, 4.00 EngStrokeIn, 101.6 EngStrokeMetric" Base
|
| Hummer H3 Cold Air Intake also fits these models: |
- 2007|2008::5Cyl 3.7L "223 cid, 3654 cc, 3.76 EngBoreIn, 95.5 EngBoreMetric, 4.00 EngStrokeIn, 101.6 EngStrokeMetric" X
- 2007|2008::5Cyl 3.7L "223 cid, 3654 cc, 3.76 EngBoreIn, 95.5 EngBoreMetric, 4.00 EngStrokeIn, 101.6 EngStrokeMetric" Base
|
|