A coolant system on a gasoline engine is a simple and efficient combination of hoses, temperature-sensitive springs, radiators, and impellors. This style of system is the general design for most passenger cars, and the Mitsubishi Mirage is no exception. Driving the critical water flow of the entire system is the Mitsubishi Mirage’s water pump.

Located within the engine block, the water pump circulates a combination of distilled water and antifreeze around the cylinders in a water jacket, where it absorbs engine heat. It moves the coolant into the external cooling system, comprised of the thermostat, coolant hoses, and, most importantly, the radiator.

If the radiator is the most obviously working part of the cooling system, than the water pump serves as its literal heart. A failure of the heart will lead to certain death. The Mitsubishi Mirage’s water pump is driven by the rotary motion of the engine. The impeller spins on its axle, pulling the fluid though. Like all mechanical parts, the water pump is subject to failure; however, because a water pump spins at a constant rate with the engine with constant resistance, it is simple to estimate its proper operating life. In a water pump, the bearings are subject to wear, and a failure of the bearings is what kills them. It is important to replace the Mitsubishi Mirage’s water pump within the specific manufacturer intervals. If you hear a sound from the engine that is frequently describes as sounding similar to sleigh bells, it is likely the water pump beginning to exhibit symptoms of failure. If it gets to this point, replace the Mitsubishi Mirage’s water pump immediately, or you could find yourself stranded with an overheated motor.It is simple to order a Mitsubishi Mirage order pump here from our easy to use online ordering system.